Troubleshooting and error code of Canon Pixma MP258 Printer.

CanonMP258 Error Code P:

P02 (Carriage error), solution:

1. Make sure no foreign object stuck in the printer roller.

2. Clean and check the encoder, may be it splashed by ink.

P03(Line feed error)

Caused: The timing disk maybe dirt/damaged

Solution :

1. Check the timing disk sensor on the left side of printer

2. Check and clean the dirt on the board

Call Canon HelpDesk: 855-517-2433

P05(ASF sensor error)

Caused : The paper detector sensor is error

Solutions :

Try to replace the one of this part below,

1. ASF / PE sensor unit

2. Motor

3. Board printer Canon MP258

P06(Internal temperature error)

Caused : the printer is overheat inside

Solutions :

1. Clean inside of the printer

2. Replace the mainboard of printer

Call Canon HelpDesk: 855-517-2433

P07 (Ink absorber full)

Caused : The ink counter is full, need to be reset using canon software

Solution: The printer need to reset using software

P08 (Print head temperature rise error)

Caused : The head is over heating, usually occurs to the colour ink cartridge

Solution : try to replace the colour ink cartridge

P09 (EEPROM error)

Caused : EEPROM board canon MP258 is corrupt or damaged

Solution : Replace the mainboard of Canon MP258 printer

P10 (Logic board/cartridge unit/both of cartridge are damaged)

Caused : The cartridge abandoned in an empty condition for a long time and used continuously to print affecting either of this part : Logic board/cartridge unit/both of cartridge

Solution : Try to replace either of the part above

P15 (USB VBUS over current)

Caused : the printer encountered an over electricity current from the USB Cable

Solution :

1. Try to replace the USB cable

Call Canon HelpDesk: 855-517-2433

P20 (Other hardware error)

Caused : Another hardware trouble

Solution : Replace the mainboard

P22 (Scanner error)

Caused : Scanner malfunction

Solution :

1. Replace the scanner Canon MP258 part

2. Replace the mainboard

Error code E Canon MP258 :

Call Canon HelpDesk: 855-517-2433

E05 : The cartridge are not installed properly or either is damaged

Solution:

1. Eject the cartridge and then reinstall

2. Replace the cartridge if it damaged

E14 and E15 : The cartridge are not installed properly

Solution : Eject the cartridge and then reinsta

E13 and E16 : Ink has run out/cartridge need to be reset

Call Canon HelpDesk: 855-517-2433. 

Configure the printer driver to the correct port - MX712

In the following instructions, "XXX" signifies your machine's name.

Log on as a user account with administrator privilege.

Select items from the [ Start ] menu as shown below.

In Windows 7, select [ Devices and Printers ] from the [ Start ] menu.

In Windows Vista, select the [ Start ] menu > [ Control Panel ] > [ Hardware and Sound ] > [ Printers ].

In Windows XP, select the [ Start ] menu > [ Control Panel ] > [ Printers and Other Hardware ] > [ Printers and Faxes ].

Open the properties of printer driver for the machine.

In Windows 7, right-click the "Canon XXX Printer" icon (where "XXX" is your machine's name), then select [ Printer properties ].

In Windows Vista or Windows XP, right-click the "Canon XXX Printer" icon (where "XXX" is your machine's name), then select [ Properties ].

Click the Ports tab to confirm the port settings.

Canon Printer HelpDesk +1-855-517-2433 (Toll Free)

How To Service My Printer - Error Code for Canon PIXMA MP287

P02 – Carriage Error, there is something wrong with your printer ink cartridge, it could be in wrong position, something blocked the chip (see at the back of cartridge), also P02 error code show sign that your print head is broken or faulty, try to take out both of the cartridge and then put it back. P07 – Ink Absorber Is Full or Almost Full, you need to reset your printer, here is an article how to reset your canon mp287 printer. Follow the step, you can reset only if your absorber is almost full. You can’t reset if your ink absorber is full, to fix the absorber is full, you need to disassemble your printer and then replace the ink absorber (it’s just a pieces of sponge located in the printer), last time I just deep the sponge into water until the sponge is clean. I found a video but for MP258, the sponge located at the same position.

Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)

How to Reset Error Code E08 in Canon MP287 - Absorber Full

When the MP287 is turned on, it will immediately appear on the LCD panel error E08 MP287. And when we do print command, then the monitor screen will show “The Ink Absorber is Almost Full”. Caption MP287 E08 error on the screen as follows:

1. Turn on the Canon MP287, MP287 LCD then the panel will pop up error E08, and there is a description of “The Ink Absorber is Almost Full” on the screen of your monitor.
2. Download Resetter MP287 at this link
3. Canon MP287 printer must be in a state of SERVICE MODE. Do I read the next step.
4. Canon MP287 Turn off the E08 error by pressing the power. Do not unplug the power cord.
5. Press and Hold the button STOP / RESET followed by pressing the POWER button. So both buttons depressed position.
   Read More... 
6. 
   Any Kind of Canon Printer Problems Call Us 
   +1-855-517-2433 (Toll Free)

How to Install Canon Printers Without the Disks

Canon printers are more commonly used for personal computers, as opposed to commercial use. These particular printers usually come with installation disks that are used to install the hardware's software drivers on the computer, but it's easy to misplace those disks over time. Luckily, the Canon support site provides software drivers for Canon printers, allowing users to install the software without the disks.
 

1 . Go to the official Canon Global website in your computer's Internet browser.

2 . Click the "Support <Drivers/Downloads>" tab along the left side of the Canon Global homepage. Select your region on the interactive map that appears on the right side of the tab options, and select the subregion where you are located.

3 . Select your product type, and click "Printers & Multifunction" to begin searching for your Canon product type. Click the product series that relates to your Canon printer.

4 . Scroll through the list of Canon printer models in the product series. Click the "Drivers & Software" link next to your Canon printer's thumbnail image. You will be redirected to the printer's product and overview page.

5 . Scroll down the Canon printer's product and overview page to the Drivers and Downloads section of the page. Click the "Select Your Operating System" drop-down bar. Select the name of your operating system, and click the red arrow to retrieve the software driver for your system.

6 . Click the .exe link under the firmware files that will be listed for the Canon "Software & Drivers" section.

                                        

7 . Run the Canon printer driver's .exe file from the File Download box that will appear. Click "Open" once the driver is processed. This file download will open the Canon installation wizard.

8 .Follow the system prompts in the Canon installation wizard to connect your Canon printer and complete the installation process.

Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)