software errors or installation issues in canon pixma mx7600 printer

Rebooting the computer is a good initial step to begin resolving software or installation issues. Instructions to restart the computer for Windows and Macintosh operating systems.

Windows 7

1. Click the Start button.
2. Click the arrow to the right of the Shutdown button .
3. Click 'Restart' from the menu that appears.

Windows Vista

1. Click the Start button.
2. Click the arrow to the right of the Lock button.
3. Click 'Restart' from the menu that appears.

Windows XP

1. Click Start
2. Select 'Turn Off Computer'
3. Click 'Restart'

Windows2000/Windows98/WindowsMe

1. Click Start
2. Select 'Turn Off Computer'
3. Click 'Restart'.

Mac OS 9.x

1. Click on the Special
2. Select 'Restart'.

If you are Facing Same more Problems Call Canon HelpDesk: 855-517-2433

Troubleshooting and error code of Canon Pixma MP258 Printer.

CanonMP258 Error Code P:

P02 (Carriage error), solution:

1. Make sure no foreign object stuck in the printer roller.

2. Clean and check the encoder, may be it splashed by ink.

P03(Line feed error)

Caused: The timing disk maybe dirt/damaged

Solution :

1. Check the timing disk sensor on the left side of printer

2. Check and clean the dirt on the board

Call Canon HelpDesk: 855-517-2433

P05(ASF sensor error)

Caused : The paper detector sensor is error

Solutions :

Try to replace the one of this part below,

1. ASF / PE sensor unit

2. Motor

3. Board printer Canon MP258

P06(Internal temperature error)

Caused : the printer is overheat inside

Solutions :

1. Clean inside of the printer

2. Replace the mainboard of printer

Call Canon HelpDesk: 855-517-2433

P07 (Ink absorber full)

Caused : The ink counter is full, need to be reset using canon software

Solution: The printer need to reset using software

P08 (Print head temperature rise error)

Caused : The head is over heating, usually occurs to the colour ink cartridge

Solution : try to replace the colour ink cartridge

P09 (EEPROM error)

Caused : EEPROM board canon MP258 is corrupt or damaged

Solution : Replace the mainboard of Canon MP258 printer

P10 (Logic board/cartridge unit/both of cartridge are damaged)

Caused : The cartridge abandoned in an empty condition for a long time and used continuously to print affecting either of this part : Logic board/cartridge unit/both of cartridge

Solution : Try to replace either of the part above

P15 (USB VBUS over current)

Caused : the printer encountered an over electricity current from the USB Cable

Solution :

1. Try to replace the USB cable

Call Canon HelpDesk: 855-517-2433

P20 (Other hardware error)

Caused : Another hardware trouble

Solution : Replace the mainboard

P22 (Scanner error)

Caused : Scanner malfunction

Solution :

1. Replace the scanner Canon MP258 part

2. Replace the mainboard

Error code E Canon MP258 :

Call Canon HelpDesk: 855-517-2433

E05 : The cartridge are not installed properly or either is damaged

Solution:

1. Eject the cartridge and then reinstall

2. Replace the cartridge if it damaged

E14 and E15 : The cartridge are not installed properly

Solution : Eject the cartridge and then reinsta

E13 and E16 : Ink has run out/cartridge need to be reset

Call Canon HelpDesk: 855-517-2433.