Friday, 30 August 2019

software errors or installation issues in canon pixma mx7600 printer

Rebooting the computer is a good initial step to begin resolving software or installation issues. Instructions to restart the computer for Windows and Macintosh operating systems.

Windows 7

  1. Click the Start button.
  2. Click the arrow to the right of the Shutdown button .
  3. Click 'Restart' from the menu that appears.
Windows Vista
  1. Click the Start button.
  2. Click the arrow to the right of the Lock button.
  3. Click 'Restart' from the menu that appears.
Windows XP
  1. Click Start
  2. Select 'Turn Off Computer'
  3. Click 'Restart'
  1. Click Start
  2. Select 'Turn Off Computer'
  3. Click 'Restart'.
Mac OS 9.x
  1. Click on the Special
  2. Select 'Restart'.
If you are Facing Same more Problems Call Canon HelpDesk: 855-517-2433

Troubleshooting and error code of Canon Pixma MP258 Printer.

P02 (Carriage error), solution:
1. Make sure no foreign object stuck in the printer roller.
2. Clean and check the encoder, may be it splashed by ink.

Caused: The timing disk maybe dirt/damaged
Solution :
1. Check the timing disk sensor on the left side of printer
2. Check and clean the dirt on the board

Call Canon HelpDesk: 855-517-2433

Caused : The paper detector sensor is error
Solutions :
Try to replace the one of this part below,
1. ASF / PE sensor unit
2. Motor
3. Board printer Canon MP258

Caused : the printer is overheat inside
Solutions :
1. Clean inside of the printer
2. Replace the mainboard of printer

Call Canon HelpDesk: 855-517-2433

P07 (Ink absorber full)
Caused : The ink counter is full, need to be reset using canon software
Solution: The printer need to reset using software

P08 (Print head temperature rise error)
Caused : The head is over heating, usually occurs to the colour ink cartridge
Solution : try to replace the colour ink cartridge

P09 (EEPROM error)
Caused : EEPROM board canon MP258 is corrupt or damaged
Solution : Replace the mainboard of Canon MP258 printer

P10 (Logic board/cartridge unit/both of cartridge are damaged)
Caused : The cartridge abandoned in an empty condition for a long time and used continuously to print affecting either of this part : Logic board/cartridge unit/both of cartridge
Solution : Try to replace either of the part above

P15 (USB VBUS over current)
Caused : the printer encountered an over electricity current from the USB Cable
Solution :
1. Try to replace the USB cable
Call Canon HelpDesk: 855-517-2433

P20 (Other hardware error)
Caused : Another hardware trouble
Solution : Replace the mainboard

P22 (Scanner error)
Caused : Scanner malfunction
Solution :
1. Replace the scanner Canon MP258 part
2. Replace the mainboard

Error code E Canon MP258 :

Call Canon HelpDesk: 855-517-2433

E05 : The cartridge are not installed properly or either is damaged
1. Eject the cartridge and then reinstall
2. Replace the cartridge if it damaged

E14 and E15 : The cartridge are not installed properly
Solution : Eject the cartridge and then reinsta

E13 and E16 : Ink has run out/cartridge need to be reset
Call Canon HelpDesk: 855-517-2433. 

Monday, 8 May 2017

Configure the printer driver to the correct port - MX712

In the following instructions, "XXX" signifies your machine's name.
Log on as a user account with administrator privilege.
Select items from the [ Start ] menu as shown below.
In Windows 7, select [ Devices and Printers ] from the [ Start ] menu.
In Windows Vista, select the [ Start ] menu > [ Control Panel ] > [ Hardware and Sound ] > [ Printers ].
In Windows XP, select the [ Start ] menu > [ Control Panel ] > [ Printers and Other Hardware ] > [ Printers and Faxes ].
Open the properties of printer driver for the machine.
In Windows 7, right-click the "Canon XXX Printer" icon (where "XXX" is your machine's name), then select [ Printer properties ].
In Windows Vista or Windows XP, right-click the "Canon XXX Printer" icon (where "XXX" is your machine's name), then select [ Properties ].
Click the Ports tab to confirm the port settings.

Canon Printer HelpDesk +1-855-517-2433 (Toll Free)

Friday, 31 August 2012

How to simple fixing your Canon Printer

Once upon a time, i got trouble when i need to print some college assignment, my canon printer wasn't works, the led indicator blinking all the time. It was a terrible moment for us, who need to done some document, but the tools are go wrong, so maybe this paper would be give us an emergency assistance and usefull for us.
The following below are explanations about troubleshooting and error code of Canon Pixma MP258 Printer.
Canon MP258 Error Codes and How to fix it :
There are 2 types of MP258 Error Code, namely:
1. that use the first letter P, example P07
2. that use the first letter E, example E05
Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)

Tuesday, 28 August 2012

How To Service My Printer - Error Code for Canon PIXMA MP287

P02 – Carriage Error, there is something wrong with your printer ink cartridge, it could be in wrong position, something blocked the chip (see at the back of cartridge), also P02 error code show sign that your print head is broken or faulty, try to take out both of the cartridge and then put it back. P07 – Ink Absorber Is Full or Almost Full, you need to reset your printer, here is an article how to reset your canon mp287 printer. Follow the step, you can reset only if your absorber is almost full. You can’t reset if your ink absorber is full, to fix the absorber is full, you need to disassemble your printer and then replace the ink absorber (it’s just a pieces of sponge located in the printer), last time I just deep the sponge into water until the sponge is clean. I found a video but for MP258, the sponge located at the same position.
Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)

How to Reset Error Code E08 in Canon MP287 - Absorber Full

When the MP287 is turned on, it will immediately appear on the LCD panel error E08 MP287. And when we do print command, then the monitor screen will show “The Ink Absorber is Almost Full”. Caption MP287 E08 error on the screen as follows:

  1. Turn on the Canon MP287, MP287 LCD then the panel will pop up error E08, and there is a description of “The Ink Absorber is Almost Full” on the screen of your monitor.
  2. Download Resetter MP287 at this link
  3. Canon MP287 printer must be in a state of SERVICE MODE. Do I read the next step.
  4. Canon MP287 Turn off the E08 error by pressing the power. Do not unplug the power cord.
  5. Press and Hold the button STOP / RESET followed by pressing the POWER button. So both buttons depressed position.
    Read More... 

  6. Any Kind of Canon Printer Problems Call Us 
    +1-855-517-2433 (Toll Free)

Monday, 30 July 2012

How to Install Canon Printers Without the Disks

Canon printers are more commonly used for personal computers, as opposed to commercial use. These particular printers usually come with installation disks that are used to install the hardware's software drivers on the computer, but it's easy to misplace those disks over time. Luckily, the Canon support site provides software drivers for Canon printers, allowing users to install the software without the disks.
1 . Go to the official Canon Global website in your computer's Internet browser.
2 . Click the "Support <Drivers/Downloads>" tab along the left side of the Canon Global homepage. Select your region on the interactive map that appears on the right side of the tab options, and select the subregion where you are located.
3 . Select your product type, and click "Printers & Multifunction" to begin searching for your Canon product type. Click the product series that relates to your Canon printer.
4 . Scroll through the list of Canon printer models in the product series. Click the "Drivers & Software" link next to your Canon printer's thumbnail image. You will be redirected to the printer's product and overview page.
5 . Scroll down the Canon printer's product and overview page to the Drivers and Downloads section of the page. Click the "Select Your Operating System" drop-down bar. Select the name of your operating system, and click the red arrow to retrieve the software driver for your system.
6 . Click the .exe link under the firmware files that will be listed for the Canon "Software & Drivers" section.
7 . Run the Canon printer driver's .exe file from the File Download box that will appear. Click "Open" once the driver is processed. This file download will open the Canon installation wizard.
8 .Follow the system prompts in the Canon installation wizard to connect your Canon printer and complete the installation process.
Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)

Friday, 22 June 2012

How to Install a Canon PIXMA MP160 Printer

the Canon PIXMA MP160 printer is an all-in-one photo printer. This printer offers high-quality resolution that gives photos a rich, dynamic finish. Using the Canon MP160 is a user-friendly process, and so is installing it, even for relatively inexperienced computer users.
Open the official Canon website (see Resources). When it opens, click on the "American" demographic symbol.
Click on the "Support and Drivers" tab on the left side of the screen. Select "Canon USA" and the screen will redirect to a popup screen. When the popup screen loads, click on the "Printer" icon. You will be prompted to locate and select your product's name and model number.
Choose your product's name and model number by clicking on the designated drop down bar in the middle of the screen. Click on the MP160 product name and model number. Your screen will be redirected to an operating system prompt. Choose your operating system in the designated drop down menu when the next screen loads.
Download the Canon MP160 setup application. Click on the Canon MP160 link that will be generated based on the information you provided. A file download dialog window will appear on your computer's screen. Click on the "Save" option that will be presented in this window. When the setup application download is complete, click on the "Open" action to access the Canon MP160 installation wizard.
Agree to the Canon Manufacturer Terms of Use. This will be the first screen that will be displayed in the Canon MP160 installation wizard. Once you have read and reviewed the Canon manufacturer user license agreement, follow the prompts that will be listed in the Canon MP160 installation wizard to complete the installation process.
Select all the default settings by simply clicking on the "Next" option that will be displayed at the bottom of the installation wizard's window.
Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)

Monday, 4 June 2012

How to Fix a Canon S520 Printer That Flashes a Gold Light

The Canon S520 is a bubble jet printer designed for home use. If the power light on your printer is flashing orange (or gold), your printer has encountered a problem. The number of times the light flashes indicates what the problem is. You can diagnose what's wrong with your Canon S520 printer.

  1 Check the paper supply if the light is flashing twice. Two flashes indicates that the printer may be out of paper or it may have a paper jam. Once the paper supply is back in order, press the "Resume/Cancel" button.

 2 Check for a paper jam if the light is flashing three times. Once the paper jam is cleared, press the "Resume/Cancel" button.

3 Check the ink tanks if the light is flashing four times. Four flashes indicates that one of the ink tanks is empty. Once you have replaced the empty ink tank, press the "Resume/Cancel" button.
4 Check that there is a printer head installed if the light is flashing six times. Once the printer head is correctly installed, press the "Resume/Cancel" button.

5 Check that the printer head is installed correctly if the light is flashing seven times. Remove and reinstall the printer head and check that its protective tape has been removed. Once the printer head is reinstalled, press the "Resume/Cancel" button. If the problem persists, replace the printer head with a new one.

 6 Take your printer to your nearest Canon service center if the light is flashing eight times. This means that the waste ink tank is almost full and needs to be emptied. To find your nearest service center, go to the service page listed in Resources and enter your product information.

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)

Friday, 18 May 2012

Canon MX870 prints incredibly slow via WIFI

I have an MX870 with an iMac quad core running OSX 10.6 and a net gear router.  I don't use a USB cable because the run would exceed 15' because of the way the furniture is layed out where the computer and printer are, and the USB cable is too long to power the connection.  This has happened with every printer I've used.  However, the printer/computer and router are all physically within about 6 feet of each other at most (I'm just trying to avoid running a USB cable directly across the carpet in the middle of the living room).  So I use the wireless printing option.  However, even when i have a document that is composed of nothing more than 1 black and white sentence and nothing else on the page, or a envelope that I'm putting nothing more on than an address, it always takes between 2-3 minutes from the time I hit print, to the time the paper comes out of the printer.  Even with wireless printing, this can't be right.  There has to be some way of speeding up the process.  Any suggestions would be welcome.  Thanks
Read More... 

Any Kind of Canon Printer Problems Call Us 
+1-855-517-2433 (Toll Free)